tfp 100 pump

Products description:
Bar Hydraulic Shear Apply to for high-speed wire Rod Rolling Mill fitted with cutting edge of special alloy steel and with special hydraulic pump station Capability of hold the best working state for a long time. cut-off the round steel of diameter 32 mm and hardness HRC38H in 2.5 seconds. After the cut-off of round steel and loosening the work button, the equipment stops serv...
Click for detail

Products description:
Hydraulic Hose Four-layer design, two of them are hose weaved with high-strength steel wires. Apply to high requirement using, 4-times safety factor. Light weight, small volume, big bending radius available Small volume expansion under pressure ...
Click for detail

Products description:
Quick Connector Use:3/8" large-flew connectorThe standard components mounting on SAVIVS hydraulic cylinder characterized with “push-connect” operation1/4" general connectorApply to wrench, electric hydraulic pump and hydraulic cylinders...
Click for detail

Products description:
Silicon Filled Pressure Gauge PsiMPa Two indication dialss show PsiMPa pressure sensor components are all sealed with silicon oil to be dampproof and capabily of wearing well. Safe seal ring and constant pressure film ...
Click for detail

Products description:
Hydraulic Bolt Tensioner Max. load:156-3834KNApplicable bolt :M20-115MMax working pressure:150MPaPrecision, fast and safety Wide-range application for various spec of bolts Wildly use and simple operation ...
Click for detail

Products description:
Hydraulic Nut It is specially suitable to narrow space and tightness of vibration mechanics of heavy load. It can simultaneously assemble several bolts of same size. No torque design is adopted to avoid the factors of that friction and bolt-torqued influence pretension force of bolts. The clamped bolts undergo pure tensile force. Preload may be given precisely. Its accuracy is...
Click for detail

Products description:
Double Acting Hydraulic Cylinder Lifting capacity:20-1000TLifting height:120-250mmMax. working pressure:70MPa Double-acting design, hydraulic retraction Inside relief valve against sudden overload   Special guide ring design can bear side load no less than 5% permitted load Standard parts for exchangeable hard-treating slotted sladder Wet painted surface against...
Click for detail

Products description:
Double Acting Stretching Jack Stretching force:50-6000KNStroke:50-300mmMax Working Pressure:70MPaDouble-acting design, hydraulic retraction Hollow plunger design applying both for pushing and pulling. Mounted with relief valve against over-loading Wet painted surface provide superior corrosion resistance each model equipped with quick connector and dustproof ca Dustproof ring ...
Click for detail

Products description:
Hydraulic Pusher Use: Hydraulic pusher for heavy objects with rails(“pusher” for short), composed of 2 units: clamping jaw and pushing unit, has been widely used in LOGISTICS INDUSTRY. Assisted with ultra-pressure electric pump station and other assistant equipments, it can realize the pushing function. The user by himself need to prepare the heavy rails(38kg/m,43 ...
Click for detail

Products description:
Single Acting Ultrathin Hydraulic Cylinder lifting capacity:5-150Tlifting hight:6-64mmMax working pressure:70MPa Flat design for use in confined areas where standard cylinders will not fit Design for mounting holes makes fasten more convinience No need for saddle at the end of grooved plunger  Wet painted surface provide superior corrosion resistance Single-acting...
Click for detail

Products description:
Single Heavy Load Hydraulic Jack Capacity:50-1000TLifting Height:50-300mmMax Working Pressure:70MpaSingle-acting, spring return used conveniently. Special synthetic coating for improved corrosion resistance and lower friction for smoother operation Cylinder can withstand over 5% pressure of rated load. Overflow port functions as a stroke limiter Interchangeable, hardened gro...
Click for detail

Products description:
Single Acting Hydraulic Cylinder lifting capacity:5-100TLifting Height:16-364mmMax working pressure:70MPa Designed for use in all positions Single-acting, spring retraction, easy opration. High strength alloy steel for durability. Baked enamel finish for increased corrosion resistance. Plunger wiper reduces contamination ingress, extending cylinder life. Some of the model...
Click for detail

Products description:
Single Acting Stretching Jack Capacity:140-1000KNStroke:8-155mmMax working pressure:70MPaSingle-acting, spring return used conveniently Hollow plunger design allows for both pull and push forces. Baked enamel finish for increased corrosion resistance. Plunger wiper reduces contamination ingress, extending cylinder life. Coupler and dust cap included on all models. ...
Click for detail

Products description:
Single Acting Ultrathin Self Locking Hydraulic Cylinder Lifting capacity:70-550TLifting Height:45-50mmMax Working Pressure:70MPa Ultra thin flat design for use where other cylinders will not fi  Lock-nut feature for positive and safe load holding over a long period of time. Single-acting, load return. Plating of special compound material provide superior corrosi...
Click for detail

Products description:
Hydraulic Nut Splitter Compact and ergonomic design, easy to use. Unique angled head design. Single-acting spring retraction cylinder. Heavy-duty chisels can be reground. Applications include servicing trucks, piping industry, tank cleaning, petrochemical, steel construction, mining, etc. ...
Click for detail

Products description:
Automatic Vehicle Mounted Hydraulic Puller Manufactured from alloy steel of super-high strength, double-acting hydraulic design Used in dismantling hydraulic tools of large shafts-and holes-work pieceAutomatical hydraulic design(automatic hydraulic lifting), auto-clamping, auto-stretching Using full stroke clamping jaws for safety Pulling jaws made from super-strength alloy ...
Click for detail

Products description:
Automatic Centre Aligning Hydraulic Puller Three-pawl simultaneously control, self-aligned, convenience use. Pulling pawls made from high strength forged alloy steel, stability for long-terms use. A completed hydraulic puller including pulling pawls, hand pump, cylinder, high-pressure hose. Working capacility 10-60 tons....
Click for detail

Products description:
Hydraulic Torque Wrench Compact design, Few moving parts means durability and low maintenance .Its raw material is a high strength and ultra-light space material and the strength and toughness of the fuselage are strengthened comprehensively. A precise axial driving hydraulic wrench, A precise ratchet adopted with accuracy ±1% The fast axial driving hydraulic wrench, ...
Click for detail

Products description:
Ultrathin Cassette Hydraulic Wrench The Drive Unit is strong unibody design,the material of the wrench is light metal material with high strength and ultra-light Its strength and life are increased comprehensively A 360°×360°swivel hose connection is closest to no hose design. No restriction is completely in applied space. A most precise cassette hydraulic wrenc...
Click for detail

Products description:
Sockets For Hydraulic Wrench Made from high-quality Cr-Mo Steel   Made according to German normal (DIN   standand 3121&3129) Adopting standard heat-treating process....
Click for detail